This Page Lists Camera around the Melbourne Wireless Network
The cameras are accessible on the Melbourne Wireless network only.
The following script can be run on the Ubiquiti AirCam's, which disables authentication for snapshot.cgi:
cat << 'EOF' > /etc/persistent/rc.poststart
echo 'airos.allow += ("/snapshot.cgi")' >> /etc/lighttpd.conf
kill -9 `ps | grep "lighttpd -D" | cut -d " " -f 3`
cfgmtd -w -p /etc/
This is persistent through reboots, however will need to be re-run after a firmware upgrade.
Alternatively if your Aircam is on the MW network, you can easily apply the above script by running the following one-liner when SSH'ed into the camera:
wget http://10.10.65.82/aircam_config.sh -O - | sh
[EditText] [Spelling] [Current] [Raw] [Code] [Diff] [Subscribe] [VersionHistory] [Revert] [Delete] [RecentChanges]
Version 13 (current) modified Mon, 07 Oct 2013 12:02:13 +1100 by markde